Video Conferencing Accessories · Logitech for Business

LoRaWAN Gateway for Logitech Spot

Reference 950-000122

Indoor Kerlink gateway hub configured for Logitech Spot sensors

5% to 95%Humidity
RJ45Connectivity
10/100 MbpsEthernet

One gateway, extended coverage

The Kerlink gateway is able to connect hundreds of Spot devices using a long-range, wide area network (LoRaWAN). No Wi-Fi or cabling needed between connections.

Connection strength per site depends on building materials and urban environment density.

Find the best area

To maximize coverage, find a central place on the floor or building where the gateway would have the best, unblocked reception.

Provision via Sync Portal

Remotely provision and configure your gateway via Sync Portal.

Connect sensors

Activate Spot sensors to ensure complete LoRaWAN connectivity.

Powered by LoRaWAN

The Kerlink gateway connects to Spot sensors via the secure LoRaWAN protocol, ensuring end-to-end encryption, and is separate from your Wi-Fi network. This enables it to be placed outside your corporate network and securely transmit all sensor data to the Sync platform for monitoring and management.

Simple to manage

Monitor and manage the gateway and Spot sensors via Sync, the Logitech platform for managing all your collaboration devices and spaces.

Simple To Install

Specifications

LoRaWAN Gateway for Logitech Spot — Specifications
Specification	Value
Dimensions
Height	6.3 in (160 mm)
Width	3.54 in (90 mm)
Depth	1.38 in (35 mm)
Weight	5.75 oz (162 g)
System requirements
Compatibility	Only with Logitech Spot sensor
Additional software	Firmware required for configuration and management,
Electrical and environmental
Power supply	230VAC/12VDC with provided jack connector 2.5mm/5.5mm
Operating temperature	-20°C +55°C (for gateway only, without power supply)
Humidity	5% to 95%
Ports and interfaces
Connectivity	RJ45
Buttons	WPS push button, Reset button
Programmable LEDs	1 x LED (green/red) for Power status, 1 LED (green/red) for Backhaul status, 1 LED (green/red) for LoRa rf activity Rx/Tx
USB (Type A)	for configuration
SMA or RP-SMA	for LoRa antenna
Mounting
Mounting options	Wall mounting by 2 oblong holes or lay on a table (4 domes)
Connectivity
Ethernet	10/100 Mbps
Backhaul connectivity	Wi-Fi 2.4GHz and Ethernet (RJ45)
Rx Sensitivity	-141 dBm (SF12)
TX Conducted Power	configurable from 5dBm to 27dBm
Antenna gain	LoRa swivel antenna 3 dBi peak gain
Security
Security Options	SecureBoot, SecureStorage, mTLS Protection, SafeReboot
General specifications
BLE sniffer	Sniffer for LBT (Listen Before Talk)
Spectrum analysis	compliant
Casing	IP30
CPU	ARM Cortex A9
Main memory	DDRAM 256MB
Flash memory	8GB eMMC (6GB available for user)
Warranty
Warranty	LoRaWAN Gateway for Logitech Spot is manufactured by Kerlink S.A., a company incorporated in France. The Logitech standard limited 2-year hardware warranty applies, subject to its terms.
In the box
Package contents	Indoor LoRa Gateway Power supply User documentation
Model variants
950-000122	LoRaWAN Gateway for Logitech Spot - Off-White — Off-White